Test equipment / Voltage Tester (2024)

Since 1948, DUSPOL® voltage testers are used in the electrical trade and industry.
Today, frequency-controlled voltages and high system voltages in photovoltaic systems and wind power plants, in electric vehicles and industrial applications have become the benchmark for voltage testers.

Particularly for the DUSPOL® digital, the following applies:

• VDE-tested and approved in compliance with EN 61243-3
• measuring category CAT IV 600 V, CAT III 1000 V
• voltage testing from 1.0 V to 1000 V AC TRUE RMS / 1200 V DC
• frequency and resistance measurement, diode test
• functions of the DUSPOL® expert

Scope of delivery incl. batteries

BENNING excels by many years of experience in the development of two-pole voltage testers and high quality. DUSPOL® can be used in modern applications and meets the high safety standards in industry and trade.

• VDE-tested and approved in compliance with EN 61243-3
• safe voltage testing for voltages of up to 1000 V AC/DC, from 50 V even in case of empty batteries
• measuring category CAT IV 600 V, CAT III 1000 V
• acoustic / visual continuity test
• LED measuring point illumination
• non-contact cable break detector
• functions of the DUSPOL® analog

Scope of delivery incl. batteries

For more than 70 years, BENNING has been developing two-pole voltage testers at the highest level.
The DUSPOL® voltage tester is professionally used worldwide in industry and trade, e. g. in electrical installations, on machines and systems related to renewable energy.

• VDE-tested and approved in compliance with EN 61243-3
• safe voltage testing for voltages of up to 1000 V AC/DC
• measuring category CAT IV 600 V, CAT III 1000 V
• load connection with vibration alert
• intentional tripping of a 30 mA RCD
• phase sequence test in a three-phase mains
• single-pole phase test
• no batteries required

Designed as an entry-level model, the PROFIPOL® + voltage tester and continuity tester has proven to be a very convenient and easy-to-use, reliable voltage tester. Locking the test handles allows one-hand operation for testing on sockets. The compact and slim design of the display handles remains unchanged.

• indicating steps from 12 V to 690 V AC/DC
• fully operational even with batteries being exhausted or removed
• acoustic / visual continuity test
• single-pole phase test, polarity test
• non-contact cable break detector

The batteries are included in the scope of delivery.

The multifunctional current clamp offers many functions and features of typical voltage testers.
Ideal for numerous applications in trade, industry and service. With the open current measuring clamp, currents can be measured even in inaccessible places.

• current measurement up to 200 A AC TRUE RMS
• voltage measurement up to 1000 V AC/DC with step indicator
• measuring category CAT IV 600 V, CAT III 1000 V
• Phase sequence testing, single-pole phase testing, continuity testing, polarity testing
• one-hand operation for voltage measurement
• measuring point illumination

The scope of delivery includes a belt holster, measuring leads, tip protection, 4 mm tip extension, batteries.

The DUTEST® pro continuity and line tester is intended for testing high-impedance and low-impedance resistances.

• continuity and semiconductor testing by means of LEDs and test buzzer
• three-stage LED step indicator
• external-voltage indication: 6 V to 400 V (LEDs / test buzzer)
• polarity testing, single-pole phase testing
• non-contact cable break detector
• precise and powerful LED torch
• buzzer volume and brightness of the LED torch are individually adjustable

A magnetic holder and belt clip are integrated on the rear of the continuity tester housing.

The BENNING SDT 1 socket tester is used for quick and easy testing for correct connection of 230 V shock-proof sockets, cable reels and extension cables. The socket tester detects existing wiring errors and indicates the status of the socket via three red LEDs.

• quick and easy testing of shock-proof sockets for correct connection
• contact sensor warns of a dangerous contact voltage at the PE contact via LC display
• unambiguous indication via LEDs and LC display
• RCD TEST key for tripping 30 mA RCDs

The three-pole phase sequence indicator TRITEST® pro is used for testing the phase sequence three-phase systems. With 400 V to 500 V, the applicable voltage range is intended for industrial networks and plants.

• phase sequence test in a three-phase system
• LED indication of phase voltages L1, L2 and L3
• LED indication of the phase sequence (clockwise/counter-clockwise)
• luminous high-power LED torch
• integrated magnetic holder and belt clip on the rear of the housing

The scope of delivery includes a set of 4 mm test probes and an alligator clip.

The TRITEST® easy is a non-contact phase tester, cable break detector and phase sequence tester – all in a single product.

• easy and reliable phase sequence testing in a three-phase system
• quick and easy phase testing of sockets, distribution boxes, switches ...
• localization of cable breaks in live lines, chains of light
• LED flashing frequency and frequency of acoustic signal are proportional to the voltage level
• voltage range: 200 V to 1000 V AC
• capacitive measuring method requires no current flow
• highest measuring category CAT IV 600 V
• break-proof ABS housing with pen clip and batteries

The BENNING VT 2 is a non-contact phase tester, cable break detector and phase sequence tester – all in a single product.

• magnetic field testing of valves, switches, relays, pumps, solenoid coils
• quick and easy phase testing of sockets, distribution boxes, switches ...
• localization of cable breaks in live lines, chains of light
• LED flashing frequency and frequency of acoustic signal are proportional to the voltage level
• voltage range: 12 V to 1000 V AC
• capacitive measuring method requires no current flow
• highest measuring category CAT IV 600 V
• break-proof ABS housing with pen clip and batteries

The BENNING VT 1 is a non-contact phase tester and cable break detector for quick and easy phase testing of sockets, distribution boxes, switches and lamps.

• quick and easy phase testing
• localization of cable breaks in live lines, chains of light
• LED flashing frequency and frequency of acoustic signal are proportional to the voltage level
• voltage range: 200 V to 1000 V AC
• capacitive measuring method requires no current flow
• Leicht zu öffnendes Batteriefach über robuste Schraubkappe
• highest measuring category CAT IV 600 V
• break-proof ABS housing with pen clip and batteries
• battery compartment can be opened easily via robust screw cap

The delivery takes place only by wholesaler.
Our agencies (* with warehouse) for the customer topologies Electrical Wholesalers (EGH) and Hardware Wholesalers (PVH):

(* EGH = for Electrical Wholesaler, PVH = for Hardware Wholesalers)